Project Details
| Price (CNY) | 80800 |
| Basic Job Requirements | |||
| Installation Requirements (mm) | 6800 × 3500 × 3200 mm | ||
| Equipment Dimensions (mm) | 6200*3300*3100mm | ||
| Overall Unit Weight / Volume | 1.8T/8m³ | ||
| Three-Phase Power / Total Machine Power | 380V / 13 kW | ||
| Power Requirements (kW) | 380V / 15kW / 50Hz 60 Hz | ||
| Maximum Car Wash Dimensions (mm) | 5300 × 2000 × 2000 | ||
| Car Wash Duration (min) | Quick Wash (2 min) / Deep Wash (5 min) — Freely Combine Car Wash Modes | ||
| Liquid Consumption (ml) | Adjustable 20–90 ml | ||
| Power Consumption (kWh) | 0.5–0.9 degrees per vehicle | ||
| Water Consumption (L) | 70–140 L/flush | ||
| Basic properties | |||
| Drive System | Vertical Drive, Variable Frequency-Controlled 360° Rotation | ||
| Vehicle Inspection System | Vehicle Body Length Detection | ||
| Automatic Proportioning System | Metering Pump Automatic Proportioning | ||
| Digital Safety Anti-Collision System | Electronic Anti-Collision System | ||
| Fan System | Built-in 3 kW All-Plastic Fans (4 Sets) / 380 V | ||
| Controller | Programmable Logic Controller (PLC) | ||
| Flushing Method | 304 Stainless Steel Rotating Arm Alternating-Position Irrigation | ||
| High-Pressure Flushing Pressure | 30–50 kilograms | ||
| Main Water Pump | 50 kg/cm² High-Pressure Plunger Pump — 4-Pole Motor, 7.5 kW / 380 V | ||
| Liquid Spray Pump | 0.37 kW, 304 Stainless Steel Water Pump | ||
| Complete Machine Sheet Metal Fabrication | Front Panel: 304 Stainless Steel + Powder Coating; Main Unit: Hot-Dip Galvanized Steel | ||
| Install Framework | Standard frame (entirely hot-dip galvanized) | ||
Fully Automatic Car Wash Machine
Reciprocating Gantry Car Wash Machine
Fully Automatic Car Wash Machine
